Omnitron-systems-technology iConverter GX/T2 Standalone Module Instrukcja Użytkownika Pobierz pdf

iConverter GX/T2

Standalone Module User Manual

Product Overview

The GX/T2 is a 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X modular ber media

converter that supports jumbo frames up to 10,240 bytes. The GX/T2 features Small Form Pluggable

(SFP) transceivers that support both 100BASE-FX and 1000BASE-X for interoperability with Fast

Ethernet and Gigabit ber equipment.

Installation Procedure

1) Congure DIP-switches

2) Install Standalone Module and Connect Cables

3) Verify Operation

1) CONFIGURE DIP-SWITCHES

DIP-SWITCH BANK 1

The location of the DIP-switches is shown in Figure 1. The functions of DIP-switch Bank 1 are

outlined in Figure 2.

SW1 and SW2: Reserved

These DIP-switches are reserved and must be in the Down (default) position.

Figure 1: DIP-switch Locations

Switch Legend Function DOWN (Default) UP

SW1 OPT1 Reserved Off On

SW2 OPT2 Reserved Off On

Figure 2: DIP-switch BANK 1 Denitions

DIP-SWITCH BANK 2

The functions of DIP-switch Bank 2 are outlined in Figure 3.

SW1: Port 1 “Auto/100”

This DIP-switch congures the speed of the transceiver installed in Port 1. If the DIP-switch is in the

Down “Auto” (default) position, the port detects the data rate of the transceiver installed and operates

at 100M or 1G accordingly. If the DIP-switch is in the Up “100” position, the port is expecting a 100M

capable transceiver to be installed.

NOTE: SW1 is not available for xed ber models. The ber port is always set to 1000.

LED Function

“Legend”

Color OFF State ON/Blinking State

Power

“PWR”

Green No power Module has power

P1 Link Activity

“100”

Green/

Amber

Port not linked at 100M

Solid Green: Port linked at 100M

Blinking Green: Data activity

Blinking Amber: Port is operating at 100M

and receiving FEFI

P1 Link Activity

“1000”

Green/

Amber

Port not linked at 1000M

Solid Green: Port linked at 1000M

Blinking Green: Data activity

Blinking Amber: Port is operating at 1000M

and receiving a remote fault

P1 Link Activity

“100” and “1000”

Green Port not linked at 10M

Solid Green: Port linked at 10M

Blinking Green: Data activity

P1 Duplex

“P1 FDX”

Green

Port is congured for half duplex

per DIP-switch or resolved by

auto-negotiation

Solid Green: Port is congured for full

duplex operation per DIP-switch or resolved

by auto-negotiation

P1 SFP DMMI Alarm

“P1 Stat”

Green/

Amber

Installed transceiver does not

support digital diagnostics or no

transceiver installed

Solid Green: Installed transceiver supports

digital diagnostics and no alarm detected

Solid Amber: Installed transceiver has

detected an alarm

P2 Negotiation Mode

“P2 AN”

Green

Port is congured for Manual

operation

Solid Green: Port is congured for Auto-

negotiation

Blinking Green: Port is congured for

auto-negotiation but has not completed the

process with attached link partner

P2 Link Activity

“100”

Green/

Amber

Port not linked at 100M

Solid Green: Port linked at 100M

Blinking Green: Data activity

Blinking Amber: Port receiving a remote

fault at 100Mbps

P2 Link Activity

“1000”

Green/

Amber

Port not linked at 1000M

Solid Green: Port linked at 1000M

Blinking Green: Data activity

Blinking Amber: Port receiving a remote

fault at 1000Mbps

P2 Link Activity

“100” and “1000”

Green Port not linked at 10M

Solid Green: Port linked at 10M

Blinking Green: Data activity

P2 Duplex

“P2 FDX”

Green

Port is congured for half duplex

per DIP-switch or resolved by

auto-negotiation

Solid Green: Port is congured for full

duplex operation per DIP-switch or resolved

by auto-negotiation

Figure 6: LED Indicators

LEDs are not installed on the xed ber models

LED Legend/State

Link Speed

“1000” “100”

OFF OFF Port not linked

OFF ON Port linked at 100Mbps

ON OFF Port linked at 1000Mbps

ON ON Port linked at 10Mbps

Figure 7: Port Speed LED Indicators

040-8520N-001B 11/13

Page 1

Omnitron Systems Technology 38 Tesla, Irvine, CA 92618

949.250.6510 tel * 949.250.6514 fax * www.omnitron-systems.com

1 2

Podsumowanie treści

Strona 1 - Standalone Module User Manual

iConverter GX/T2 Standalone Module User ManualProduct OverviewThe GX/T2 is a 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X modular ber

Strona 2 - Page 2 Page 3

SW2: Port 2 “AN/Man”This DIP-switch congures Port 2 for Auto Negotiation or Manual operation. Switch Legend Function DOWN (Default) UPSW1 Auto/100 P

Komentarze do niniejszej Instrukcji

Brak uwag

Omnitron-systems-technology iConverter GX/T2 Standalone Module Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Komunikacja Omnitron-systems-technology iConverter GX/T2 Standalone Module. Omnitron Systems Technology iConverter GX/T2 Standalone Module User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Komunikacja Omnitron-systems-technology iConverter GX/T2 Standalone Module